AFL Goal Posts

AFL Goal Posts Diagram


7. 5 – 15 Metre Tapered Goal Posts

PRODUCT CODE Format Size Guide A Goal Post Height (metres) B Point Post Height (metres) C/D Goal Post OD Diameter (millimetres) E/F Point Post OD Diameter (millimetres)
MS-32 SENIOR 7.5 5 80/48 80/48
MS-33 SENIOR REG. 9 6 100/57 80/48
MS-34 SENIOR REG. 9 6 100/57 100/57
MS-35 STATE LEAGUE 12 9 125/75 100/57
MS-36 STATE LEAGUE 12 9 125/75 125/75
MS-37 AFL 15 12 125/75 125/75

Primary and High School Un-Tapered Goal Posts

PRODUCT CODE Format Size Guide A Goal Post Height (metres) B Point Post Height (metres) C/D Goal Post OD Diameter (millimetres) E/F Point Post OD Diameter (millimetres)
MS-30 JUNIOR 6 3.75 80/80 80/80
MS-31 SENIOR 7.5 5 80/80 80/80

AFL goals are available in five different set heights:

JUNIOR 6 metre goal posts & 3.75 metre point posts Used for primary schools and kicking sets for public open space
SENIOR 7.5 metre goal posts & 5 metre point posts Most common height for high schools and suburban grounds that require removal and storage in off season
SENIOR REGIONAL 9 metre goal posts & 6 metre point posts Most common height for senior regional grounds
STATE LEAGUE 12 metre goal posts & 9 metre point posts AFL code specification for senior state competition matches, standard height for WAFL match grounds
NATIONAL LEAGUE 15 metre goal posts & 12 metre point posts AFL code requirements for national senior AFL competition matches, As used at all of the major stadiums nation wide

Specifications:

  • 1 x Set of goals includes: 4 x goal posts, 4 x point posts, 8 x ground tubes (ie. at both ends of oval)
  • Manufactured from T6 high-tensile marine grade aluminium tube AS4100
  • Spun-tapered for the top section of posts (un-tapered optional)
  • Goal posts are manufactured from one-piece of tube for the 6.0 – 9.0 metre goals and two-pieces of tube for the 12.0 and 15.0 metre goals.
  • UV-stabilized heavy-duty white powder coat finish done to Australian Standards AS3715-2002 (Dulux – Pearl White as standard)
  • UV-Stabilized nylon caps in the tops of all posts
  • Hot dipped galvanised steel spigots fitted with machined HDPE (High Density Polyethylene) bushes
  • Spigot base and ground tube sleeve footing system
  • In ground footing (ability to become semi-permanent, if removal is required in the off-season where grounds are utilised for multiple sports codes throughout the year)
  • Optional Hinging base models are also available for the 12.0 and 15.0 metre goal posts sets
  • T6 high-tensile marine grade aluminium ground tubes with drainage caps in ends and Stainless steel locking security screws below ground level
  • Machined solid HDPE ground tube cap plugs
  • Engineering certification in accordance with AS1170.2 and AS4100

AFL Goal Posts Gallery

Looking for prices?